110-277VAC CV 96W/100W/150W/200W Linear Triac 0-10V 5-in-1 Dimmable LED Power Supply

Product Introduction

The KVL-DW Series 5-in-1 Dimmable LED Driver is a professional constant voltage LED power supply available in 96W, 100W, 150W, and 200W, with 24V and 48V output options. Designed for flexible lighting control, it supports multiple dimming methods, including 0-10V, 1-10V, 10V PWM, potentiometer, TRIAC forward-phase, ELV reverse-phase, and MLV dimming, making it compatible with a wide range of lighting control systems.

Supporting a 110–277VAC input range and 47–63Hz frequency, the KVL-DW features built-in active PFC and efficiency of up to 93%, helping provide stable and efficient power for LED lighting systems. It delivers tight output regulation, with voltage tolerance of ±1.5% for 24V and ±1% for 48V, and voltage regulation of ≤0.5%. Low THD and flicker-free operation further support consistent lighting performance, while short-circuit, overload, and over-temperature protection enhance operating reliability. Free-air convection cooling allows efficient heat dissipation without additional cooling equipment.

With its broad input range, multiple dimming options, and reliable constant voltage output, the KVL-DW Series is suitable for residential, commercial, architectural, and other professional LED lighting applications. Its flexible control compatibility makes it a practical choice for lighting manufacturers, system integrators, and projects requiring different dimming interfaces. The series is backed by a 5-year warranty for long-term project support.

Specification

Features 

• Output: Constant Current

• Range: 110-277VAC

• PFC design: Built-in active PFC function

• Efficiency: Up to 93%

• Protections: Short circuit / over load / over temperature

• Heat dissipation: Cooling by free air convection

• Waterproof performance: Full aluminum protection housing,for dry& damp locations (US)

• Dimming function: Phase dimming: work with Forward phase, MLV and Reverse phase, ELV, TRIAC dimmers.  

• 0-10V dimming: 0-10V/1-10V/Potentiometer/10V PWM 4 in 1 

• Dimming mode: PWM mode or Voltage reduce (VR) mode. VR mode: 24V(14-24V); 48V(28-48V)

• Dimming range: 0-100%  depth dimming 0.1%

• Min.load: 15%

• Application: Suitable for LED lighting and moving sign applications

• Warranty: 5 years warranty

• Others: Low THD & Flicker-free 

• Certificate: UL, FCC, ICES-005, ENEC, CE, UKCA, Class P, TYPE HL, ROHS, REACH

Application

• Residential Lighting — For dimmable LED strips, cove lighting, cabinet lighting, and other residential applications.

• Commercial Lighting — Suitable for retail stores, offices, hotels, restaurants, and other commercial spaces requiring flexible lighting control.

• Architectural & Interior Lighting — Ideal for decorative, accent, and ambient lighting where precise dimming is required.

• LED Strip Lighting — Designed for constant voltage LED strips and linear lighting systems with 24V or 48V output.

• Lighting Control Systems — Compatible with multiple dimming interfaces, making it suitable for projects using 0-10V, 1-10V, PWM, potentiometer, TRIAC, ELV, or MLV controls.

• Custom Lighting Projects — A flexible power solution for lighting manufacturers, system integrators, and projects with specific dimming and control requirements.

Connecting Diagram

Triac / 0-10V / 1-10V / Potentiometer / 10V PWM 5-in-1 Dimmable LED Driver - Constant Voltage Output

Dimming Operation and Connecting Diagram

• Using two ways of dimming at the same time, you must be assured that LED lighting is up to the max. Brightness then you could operate with the other dimming;

  

• Using one dimming ---TRIAC/Phase cut dimming

1.The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection

2.a phase /Triac dimmer or lighting system.

3.Working with forward phase /leading edge, MLV and Reverse phase /trailing edge, ELV, TRIAC dimmers or light system.

4.Min. loading is about 30%

5.Please try to use dimmers with power at least 1.5 times as the output power of the driver.

• Using one dimming ---0-10/ 1-10V/ 10V PWM/ Potentiometer dimming

FAQ

Q1: What power and output voltage options are available for the KVL-DW Series?

A: The KVL-DW Series is available in 96W, 100W, 150W, and 200W models, with 24V and 48V constant voltage outputs to support different LED lighting loads.

Q2: Which dimming methods does the KVL-DW Series support?

A: The series supports multiple dimming methods, including 0-10V, 1-10V, 10V PWM, potentiometer, TRIAC forward-phase, ELV reverse-phase, and MLV dimming, providing flexible compatibility with different lighting control systems.

Q3: What input voltage does the KVL-DW Series support?

A: The KVL-DW Series supports a 110-277VAC input range with a 47-63Hz frequency range, making it suitable for a wide range of professional LED lighting installations.

Q4: Is the KVL-DW Series suitable for projects with different dimming control systems?

A: Yes. Its multiple dimming interfaces make it suitable for lighting projects that require different control methods. It can be used with compatible 0-10V, 1-10V, PWM, potentiometer, TRIAC, ELV, and MLV control systems.

Q5: What protections are built into the KVL-DW Series?

A: The LED power supply features short-circuit, overload, and over-temperature protection. Active PFC, low THD, and free-air convection cooling also support stable and reliable operation.

Q6: Can SCPOWER provide customization for the KVL-DW Series?

A: Yes. As an experienced dimmable LED driver manufacturer, SCPOWER can support OEM/ODM requirements such as output specifications, dimming compatibility, and product configuration, subject to project requirements.

Q7: What certifications are available for shengchang (SCPOWER) LED power supply?

A: Our portfolio includes UL, cUL, ETL, FCC, CCC, RCM, SAA, ENEC, CE, CB, BIS, PSE, ICES-005, ErP, WEEE, DALI-2, D4i, Class 2, Class P, TYPE HL, UKCA, RoHS, REACH, and ISO 9001. Certification availability varies by product model, specifications, and target market. Please contact us to confirm the certifications available for your specific product.

Q8: How can I request a quotation?

A: Please provide your LED specifications, required quantity, application scenario, and customization requirements, then submit an inquiry through our inquiry form. Our sales and technical team will respond within 24 hours.