100-277VAC CV 30W-100W TRIAC 0-10V LED Power Supply

Product Introduction

Experience smooth and reliable brightness control with the TRIAC & 0-10V 5-in-1 Dimmable LED Driver from SCPOWER. This AC-to-DC constant voltage LED power supply converts a standard 100–277VAC input into stable DC output for 12V, 24V, 36V, and 48V LED lighting systems, including LED strip lights, tape lights, puck lights, under-cabinet lighting, and other low-voltage LED fixtures.

The dimmable LED driver supports TRIAC / Phase-Cut dimming, with compatibility for Forward Phase, MLV, Reverse Phase, ELV, and TRIAC dimmers. It also provides 0-10V control with four input methods: 0-10V, 1-10V, Potentiometer, and 10V PWM, providing flexible control options for different lighting systems.

Designed for both residential and commercial lighting applications, this LED power supply provides stable low-voltage output and consistent dimming performance. As an experienced LED driver manufacturer, SCPOWER offers reliable power solutions for a wide range of low-voltage LED lighting projects.

The driver also supports selectable Pulse-Width Modulation (PWM) and Voltage Reduction (VR) output modes, allowing users to switch between the two modes according to the requirements of the connected LED load. In PWM mode, the dimming range is 0–100%. In VR mode, the output voltage can be reduced from 0V up to the rated output voltage, including 0–12V for 12V models, 0–24V for 24V models, and 0–48V for 48V models.

The full plastic protective housing is designed for installation in dry and damp locations, providing a practical solution for a variety of indoor low-voltage LED lighting applications.

Compatible LED lighting fixtures are sold separately.

Specification

Features 

• Output: Constant Voltage

• Range: 100-277VAC

• PFC design: Built-in active PFC function

• Efficiency: Up to 91%

• Protections: Short circuit / Over load / Over temperature

• Heat dissipation: Cooling by free air convection

• Waterproof performance: Full plastic protection housing, for dry & damp locations.

• Design features: Output mode selection: Pulse-Width Modulation (PWM) & Voltage Reduce (VR) mode can be switched.

• Dimming function: Phase dimming: work with Forward phase, MLV and Reverse phase, ELV, TRIAC dimmers.

• 0-10V dimming: 0-10V/1-10V/Potentiometer/10V PWM 4 in 1.

• Min load: Min load is 20%

• Dimming range: PWM: 0-100%

• VR: 12V: 0~12V   24V: 0~24V   48V: 0~48V

• Dimming depth: WM: 0.1%

• VR: 12V: 7V±0.5V   24V: 14V±0.5V   48V: 28V±1V

• Application: Suitable for the application of LED lighting

• Warranty: 5 years warranty

• Certificate: UL, cUL, FCC, Class2, Class P, TYPE HL, SELV, RoHS, Reach

Application

• Residential Lighting — LED strips, under-cabinet lighting, and decorative lighting.

• Commercial Lighting — Retail stores, offices, showrooms, and other commercial spaces.

• Hospitality Lighting — Hotels, restaurants, cafés, and ambient lighting.

• Architectural Lighting — Accent, decorative, and feature lighting.

• Display Lighting — Display cabinets, shelves, and showcases.

Connecting Diagram

TRIAC & 0-10V Dimmable LED Driver - Constant Volatge Output

FAQ

Q1: What dimming methods does this 5-in-1 LED driver support?

A: The LED driver supports multiple dimming methods. For TRIAC / Phase-Cut dimming, it is compatible with Forward Phase, MLV, Reverse Phase, ELV, and TRIAC dimmers. For 0-10V dimming, it supports 0-10V, 1-10V, Potentiometer, and 10V PWM control.

Q2: What output voltage options are available for this LED driver?

A: The driver is available with 12V, 24V, 36V, and 48V DC output options, making it suitable for a wide range of low-voltage LED lighting applications. The output voltage should be selected according to the requirements of the connected LED load.

Q3: Can the output mode be switched between PWM and Voltage Reduction (VR)?

A: Yes. The LED driver supports two output modes: Pulse-Width Modulation (PWM) and Voltage Reduction (VR). Users can switch between the two modes according to the requirements of the connected LED lighting load.

Q4: What is the dimming range of the PWM and VR output modes?

A: In PWM mode, the dimming range is 0–100%. In VR mode, the output voltage can be reduced according to the selected output voltage: 0–12V for 12V models, 0–24V for 24V models, and 0–48V for 48V models.

Q5: What type of LED lighting is this dimmable LED driver suitable for?

A: The constant voltage LED driver is suitable for LED strip lights, tape lights, puck lights, under-cabinet lighting, and other low-voltage LED fixtures. It can be used in both residential and commercial lighting installations.

Q6: Is this LED driver suitable for dry and damp locations?

A: Yes. The driver features a full plastic protective housing and is designed for use in dry and damp locations. The actual installation should follow the product specifications and applicable electrical codes.

Q7: What certifications are available for shengchang (SCPOWER) LED power supply?

Shengchang (SCPOWER) offers a broad range of certifications across its LED power supply portfolio, including UL, cUL, ETL, FCC, CCC, RCM, SAA, ENEC, CE, CB, BIS, PSE, ICES-005, ErP, WEEE, DALI-2, D4i, Class 2, Class P, TYPE HL, UKCA, RoHS, REACH, and ISO 9001. Certification availability varies by product model, specification, and target market. Please contact us to confirm the certifications applicable to a specific product.

Q8: How can I request a quotation or sample?

Send us your LED specifications, quantity, application, and customization requirements for a product recommendation, sample, or quotation. You can also fill out our inquiry form with your project details, and our sales or technical team will review your requirements and respond within 24 hours.