100-277VAC CC 10W/20W/40W/60W DIP Address DMX512 Dimmable LED Driver

Product Introduction

The KIX-xC-J Series is a DMX512 constant current dimmable LED driver designed for professional single-color LED lighting applications. Available in 10W, 20W, 40W, and 60W models, it provides one-channel constant current output with an adjustable current range of 100mA to 2100mA, allowing the driver to match different LED fixture and LED module requirements.

The output current can be configured through the built-in DIP switches, with a current tolerance of ±5%. This adjustable-current design provides greater flexibility when selecting a suitable output current for different LED loads while maintaining stable constant current regulation.

The driver supports DMX512 digital dimming and provides a 1–100% dimming range with a dimming depth down to 1%. Its smooth dimming performance is designed to minimize visible flicker, while the driver operates without buzzing noise under normal operating conditions.

For DMX address configuration, the KIX-xC-J Series features manual address setting buttons and a digital display, allowing users to directly assign and view the DMX starting address on the driver. This provides a convenient solution for installation, commissioning, and maintenance in DMX512 lighting systems.

With a 100–277VAC input range and a power factor of 0.97 at 120VAC and 0.88 at 277VAC, the KIX-xC-J Series provides stable AC-to-DC power conversion for professional lighting applications. Its constant current output makes it suitable for LED fixtures that require a regulated current source.

Specification

Features 

• Output: Constant Current

• Range: 100-277VAC

• PFC design: Built-in active PFC function

• Efficiency: Up to 88%

• Protections: Short circuit / Over temperature

• Heat dissipation: Cooling by free air convection

• Waterproof performance: Built-in Junction box driver, for dry and damp locations.

• Dimming function: DMX dimming

• Dimming range: 1-100% and dimming depth 1%.

• Application: Suitable for the application of LED lighting

• Warranty: 5 years warranty

• Certificate: ROHS, REACH

Application

• Downlight Lighting — For dimmable LED downlights requiring adjustable constant current output and DMX512 control.

• Spotlight Lighting — Suitable for LED spotlights with different forward-current requirements and centralized DMX512 dimming.

• Track Lighting — For professional track lighting systems requiring precise constant current regulation and digital dimming.

• Commercial Lighting — Suitable for retail stores, hotels, offices, and other commercial spaces requiring centralized lighting control.

• Architectural Lighting — For accent and feature lighting where flexible current adjustment and DMX512 control are required.

• Professional Lighting Projects — Ideal for single-color LED fixtures requiring adjustable constant current output and programmable DMX512 addresses.

Connecting Diagram

DMX Dimmable LED Driver - Constant Current Output

Instructions

• This driver should be installed by qualified and professional person.

• Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.

• Ensure that wiring is correct before test in order to avoid light and power supply damage.

• If driver Cannot work normally, don’t maintain privately.

• Have any questions, please contact Zhuhai Shengchang.

• Please visit our website or contact us for more information!

FAQ

Q1: What output current range does the KIX-xC-J Series support?

A: The KIX-xC-J Series provides single-channel constant current output, with the output current adjustable from 100mA to 2100mA through the built-in DIP switches. This allows the driver to match LED fixtures and modules with different current requirements.

Q2: What power and input voltage options are available?

A: The series is available in 10W, 20W, 40W, and 60W models, with a 100–277VAC input range. The power factor is 0.97 at 120VAC and 0.88 at 277VAC.

Q3: How is the output current adjusted?

A: The output current is configured using the driver's DIP switches. Different DIP switch combinations correspond to different current settings, with a current tolerance of ±5%. The selected current should match the rated forward current of the connected LED fixture or module.

Q4: How can I set the DMX512 address?

A: The DMX512 starting address can be manually assigned using the buttons on the driver and viewed directly on the digital display, making address configuration convenient during installation and commissioning.

Q5: What dimming performance does the DMX512 LED driver provide?

A: The driver supports a 1–100% dimming range with a dimming depth down to 1%, providing smooth and precise brightness control for single-color LED lighting applications. The design supports flicker-free dimming under compatible system conditions.

Q6: What type of LED lighting is the KIX-xC-J Series suitable for?

A: With adjustable constant current output from 100mA to 2100mA, the series is suitable for single-color LED downlights, spotlights, track lights, commercial lighting, architectural lighting, and other professional LED fixtures requiring DMX512 control.

Q7: What certifications are available for Shengchang (SCPOWER) LED power supply?

A: Shengchang (SCPOWER) offers a broad range of certifications across its LED power supply portfolio, including UL, cUL, ETL, FCC, CCC, RCM, SAA, ENEC, CE, CB, BIS, PSE, ICES-005, ErP, WEEE, DALI-2, D4i, Class 2, Class P, TYPE HL, UKCA, RoHS, REACH, and ISO 9001. Certification availability varies by product model, specification, and target market. Please contact us to confirm the certifications applicable to a specific product.

Q8: How can I request a quotation for the KIX-xC-J Series?

A: Send us your LED specifications, required output current, power, quantity, application, and customization requirements for a product recommendation and quotation. You can also fill out our inquiry form with your project details. Our sales or technical team will review your requirements and respond within 24 hours.